Ingredients:
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Close the mold by firmly pressing the edges together. For added safety, clamp the edges. Support the mold with two flat objects such as two mitre boxes on their sides. Slowly pour melted soap no hotter than 130ºF into mold. Allow soap to harden then open mold and remove soap. Trim edges with a potato peeler or spatula then slice into bars.
Cold Process Soap: Close the mold by firmly pressing the edges together, and clamp the sides. Support the mold with two flat objects such as two mitre boxes on their sides. Slowly pour traced soap into mold. After at least 24 hours, remove soap from mold with gloved hands. If desired, trim edges with a potato peeler or spatula. Slice into bars and allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Hot Process Soap: Close the mold by firmly pressing the edges together, and clamp the sides. Scoop hot process soap into mold. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Open mold and remove soap loaf. If desired, trim edges with a potato peeler or spatula. Slice into bars.
Care:
Hand wash mold in warm, sudsy water.
 |
Average Customer Rating: |
 |
(3 Reviews) |
|
Neda • South Carolina
Date Submitted: 11/19/2017
|
|
"Easy to Use, not Square" |
|
COMMENTS: The mold did not leak and was easy to unmold. It did bow our on the sides significantly so that the bars were not square. It made it difficult to package them as they wouldn't fit in soap bar shrink wrap for square bars. If you are not particular about having square bars, it is a great mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to unmold
• Didn't leak
|
|
• Didn't produce square bars
|
|
|
|
Kimberly • Missouri
Date Submitted: 08/30/2016
I Recommend This Product!
|
 |
"Column molds" |
|
COMMENTS: These are excellent molds. Easy to unmold . Great to work with.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• The closure needs to be a little tighter
|
|
|
|
barb • Michigan
Date Submitted: 04/12/2015
|
 |
"distorts" |
|
COMMENTS: i would give this mold an excellent for ease of use, no leaking and unmolds even my ungelled soap in 24 hours with no sticking. however i gave it a fair because the log of soap is not a true rectangle when unmolded. it bowed on both sides from the weight of the soap. :(
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• no leaking
• ease of unmolding soap
|
|
• do something to keep it's shape
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
2 Question(s) Shown Below |
